Chess GST controllers

BiSensor CO2

Article number: BLC.5406.001 (light grey) / BLC.5416.001 (white)

The BiSensor CO2 is a CO2, PIR slight motion sensor and light sensor for Mymesh applications like indoor climate monitoring and
light & climate control.

Installation

The BiSensor CO2 fits perfectly flush mount in a rectangular hole of 42mm x 82mm. The raised edge is 0.8mm to lock the BiSensor in the rectangular hole. The luminaire spring clip holds the Tri-Sensor in place.

The BiSensor CO2 has no brackets and is fully integrated in the luminaire.

Technical

Electrical

Wieland GST pluggable

230VAC (+/-10% 50Hz)

Detection

Motion Detection

Measurement of light level at the ceiling

Bluetooth beaconing for location based services

Dimensions/weight

86.3 x 46.5 x 52 mm / 101g

IP rating

IP20

Network

Mymesh 2.4GHz

Features

The Mymesh network and the Building Automation System work closely together in controlling the climate ceiling. Light control is locally handled by the Mymesh network using motion- and occupancy detection for switching and daylight harvesting for dimming the lighting. Both TriSensor and Room Control app are connected to the Building Automation System via the Mymesh REST API. The Building Automation System handles the actual room measurements versus the given setpoints via the app.

Installed at a typical ceiling height of 3 meter, the occupancy and PIR sensor cover an area of approximately 10m2. Like the climate ceiling the Tri-Sensor needs to cover the area and is applied in a modular grid/pattern.